The Firest Version
This commit is contained in:
326
HALLIB/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
Normal file
326
HALLIB/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
Normal file
@@ -0,0 +1,326 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_fmpi2c_ex.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.4.2
|
||||
* @date 10-November-2015
|
||||
* @brief Extended FMPI2C HAL module driver.
|
||||
*
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
|
||||
* + Extended Control methods
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### FMPI2C peripheral extended features #####
|
||||
==============================================================================
|
||||
|
||||
[..] Comparing to other previous devices, the FMPI2C interface for STM32L4XX
|
||||
devices contains the following additional features
|
||||
|
||||
(+) Possibility to disable or enable Analog Noise Filter
|
||||
(+) Use of a configured Digital Noise Filter
|
||||
(+) Disable or enable wakeup from Stop mode
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..] This driver provides functions to configure Noise Filter
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup FMPI2CEx FMPI2CEx
|
||||
* @brief FMPI2C HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
|
||||
#if defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx)
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup FMPI2CEx_Exported_Functions_Group1 Peripheral Control methods
|
||||
* @brief management functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Extension features functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure Noise Filters
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configures FMPI2C Analog noise filter.
|
||||
* @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified FMPI2Cx peripheral.
|
||||
* @param AnalogFilter : new state of the Analog filter.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
|
||||
assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter));
|
||||
|
||||
if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
|
||||
|| (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected FMPI2C peripheral */
|
||||
__HAL_FMPI2C_DISABLE(hfmpi2c);
|
||||
|
||||
/* Reset FMPI2Cx ANOFF bit */
|
||||
hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF);
|
||||
|
||||
/* Set analog filter bit*/
|
||||
hfmpi2c->Instance->CR1 |= AnalogFilter;
|
||||
|
||||
__HAL_FMPI2C_ENABLE(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hfmpi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures FMPI2C Digital noise filter.
|
||||
* @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified FMPI2Cx peripheral.
|
||||
* @param DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter)
|
||||
{
|
||||
uint32_t tmpreg = 0;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
|
||||
assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter));
|
||||
|
||||
if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
|
||||
|| (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected FMPI2C peripheral */
|
||||
__HAL_FMPI2C_DISABLE(hfmpi2c);
|
||||
|
||||
/* Get the old register value */
|
||||
tmpreg = hfmpi2c->Instance->CR1;
|
||||
|
||||
/* Reset FMPI2Cx DNF bits [11:8] */
|
||||
tmpreg &= ~(FMPI2C_CR1_DFN);
|
||||
|
||||
/* Set FMPI2Cx DNF coefficient */
|
||||
tmpreg |= DigitalFilter << 8;
|
||||
|
||||
/* Store the new register value */
|
||||
hfmpi2c->Instance->CR1 = tmpreg;
|
||||
|
||||
__HAL_FMPI2C_ENABLE(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hfmpi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables FMPI2C wakeup from stop mode.
|
||||
* @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified FMPI2Cx peripheral.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
|
||||
|
||||
if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
|
||||
|| (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected FMPI2C peripheral */
|
||||
__HAL_FMPI2C_DISABLE(hfmpi2c);
|
||||
|
||||
/* Enable wakeup from stop mode */
|
||||
hfmpi2c->Instance->CR1 |= FMPI2C_CR1_WUPEN;
|
||||
|
||||
__HAL_FMPI2C_ENABLE(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hfmpi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disables FMPI2C wakeup from stop mode.
|
||||
* @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified FMPI2Cx peripheral.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
|
||||
{
|
||||
/* Check the parameters */
|
||||
assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
|
||||
|
||||
if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
|
||||
|| (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
|
||||
{
|
||||
return HAL_BUSY;
|
||||
}
|
||||
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
|
||||
|
||||
/* Disable the selected FMPI2C peripheral */
|
||||
__HAL_FMPI2C_DISABLE(hfmpi2c);
|
||||
|
||||
/* Enable wakeup from stop mode */
|
||||
hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_WUPEN);
|
||||
|
||||
__HAL_FMPI2C_ENABLE(hfmpi2c);
|
||||
|
||||
hfmpi2c->State = HAL_FMPI2C_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hfmpi2c);
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable the FMPI2C1 fast mode plus driving capability.
|
||||
* @param ConfigFastModePlus: selects the pin.
|
||||
* This parameter can be one of the @ref FMPI2CEx_FastModePlus values
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
|
||||
{
|
||||
/* Check the parameter */
|
||||
assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* Enable fast mode plus driving capability for selected pin */
|
||||
SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable the FMPI2C1 fast mode plus driving capability.
|
||||
* @param ConfigFastModePlus: selects the pin.
|
||||
* This parameter can be one of the @ref FMPI2CEx_FastModePlus values
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
|
||||
{
|
||||
/* Check the parameter */
|
||||
assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
|
||||
|
||||
/* Enable SYSCFG clock */
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
|
||||
/* Disable fast mode plus driving capability for selected pin */
|
||||
CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* STM32F410xx || STM32F446xx */
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user