The Firest Version
This commit is contained in:
Qiea
460
HALLIB/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
Normal file
460
HALLIB/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
Normal file
@@ -0,0 +1,460 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_wwdg.c
|
||||
* @author MCD Application Team
|
||||
* @version V1.4.2
|
||||
* @date 10-November-2015
|
||||
* @brief WWDG HAL module driver.
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the Window Watchdog (WWDG) peripheral:
|
||||
* + Initialization and de-initialization functions
|
||||
* + IO operation functions
|
||||
* + Peripheral State functions
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### WWDG specific features #####
|
||||
==============================================================================
|
||||
[..]
|
||||
Once enabled the WWDG generates a system reset on expiry of a programmed
|
||||
time period, unless the program refreshes the counter (downcounter)
|
||||
before reaching 0x3F value (i.e. a reset is generated when the counter
|
||||
value rolls over from 0x40 to 0x3F).
|
||||
|
||||
(+) An MCU reset is also generated if the counter value is refreshed
|
||||
before the counter has reached the refresh window value. This
|
||||
implies that the counter must be refreshed in a limited window.
|
||||
(+) Once enabled the WWDG cannot be disabled except by a system reset.
|
||||
(+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
|
||||
reset occurs.
|
||||
(+) The WWDG counter input clock is derived from the APB clock divided
|
||||
by a programmable prescaler.
|
||||
(+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
|
||||
(+) WWDG timeout (mS) = 1000 * Counter / WWDG clock
|
||||
(+) WWDG Counter refresh is allowed between the following limits :
|
||||
(++) min time (mS) = 1000 * (Counter _ Window) / WWDG clock
|
||||
(++) max time (mS) = 1000 * (Counter _ 0x40) / WWDG clock
|
||||
|
||||
(+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms
|
||||
|
||||
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
(+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
|
||||
(+) Set the WWDG prescaler, refresh window and counter value
|
||||
using HAL_WWDG_Init() function.
|
||||
(+) Start the WWDG using HAL_WWDG_Start() function.
|
||||
When the WWDG is enabled the counter value should be configured to
|
||||
a value greater than 0x40 to prevent generating an immediate reset.
|
||||
(+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is
|
||||
generated when the counter reaches 0x40, and then start the WWDG using
|
||||
HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can
|
||||
add his own code by customization of function pointer HAL_WWDG_WakeupCallback
|
||||
Once enabled, EWI interrupt cannot be disabled except by a system reset.
|
||||
(+) Then the application program must refresh the WWDG counter at regular
|
||||
intervals during normal operation to prevent an MCU reset, using
|
||||
HAL_WWDG_Refresh() function. This operation must occur only when
|
||||
the counter is lower than the refresh window value already programmed.
|
||||
|
||||
*** WWDG HAL driver macros list ***
|
||||
==================================
|
||||
[..]
|
||||
Below the list of most used macros in WWDG HAL driver.
|
||||
|
||||
(+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral
|
||||
(+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
|
||||
(+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags
|
||||
(+) __HAL_WWDG_ENABLE_IT: Enables the WWDG early wake-up interrupt
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG WWDG
|
||||
* @brief WWDG HAL module driver.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @brief Initialization and Configuration functions.
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### Initialization and de-initialization functions #####
|
||||
==============================================================================
|
||||
[..]
|
||||
This section provides functions allowing to:
|
||||
(+) Initialize the WWDG according to the specified parameters
|
||||
in the WWDG_InitTypeDef and create the associated handle
|
||||
(+) DeInitialize the WWDG peripheral
|
||||
(+) Initialize the WWDG MSP
|
||||
(+) DeInitialize the WWDG MSP
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Initializes the WWDG according to the specified
|
||||
* parameters in the WWDG_InitTypeDef and creates the associated handle.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Check the WWDG handle allocation */
|
||||
if(hwwdg == NULL)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
|
||||
assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
|
||||
assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
|
||||
assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
|
||||
|
||||
if(hwwdg->State == HAL_WWDG_STATE_RESET)
|
||||
{
|
||||
/* Allocate lock resource and initialize it */
|
||||
hwwdg->Lock = HAL_UNLOCKED;
|
||||
/* Init the low level hardware */
|
||||
HAL_WWDG_MspInit(hwwdg);
|
||||
}
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_BUSY;
|
||||
|
||||
/* Set WWDG Prescaler and Window */
|
||||
MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));
|
||||
/* Set WWDG Counter */
|
||||
MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_READY;
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInitializes the WWDG peripheral.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Check the WWDG handle allocation */
|
||||
if(hwwdg == NULL)
|
||||
{
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_BUSY;
|
||||
|
||||
/* DeInit the low level hardware */
|
||||
HAL_WWDG_MspDeInit(hwwdg);
|
||||
|
||||
/* Reset WWDG Control register */
|
||||
hwwdg->Instance->CR = (uint32_t)0x0000007F;
|
||||
|
||||
/* Reset WWDG Configuration register */
|
||||
hwwdg->Instance->CFR = (uint32_t)0x0000007F;
|
||||
|
||||
/* Reset WWDG Status register */
|
||||
hwwdg->Instance->SR = 0;
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_RESET;
|
||||
|
||||
/* Release Lock */
|
||||
__HAL_UNLOCK(hwwdg);
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initializes the WWDG MSP.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(hwwdg);
|
||||
/* NOTE: This function Should not be modified, when the callback is needed,
|
||||
the HAL_WWDG_MspInit could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInitializes the WWDG MSP.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(hwwdg);
|
||||
/* NOTE: This function Should not be modified, when the callback is needed,
|
||||
the HAL_WWDG_MspDeInit could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### IO operation functions #####
|
||||
==============================================================================
|
||||
[..]
|
||||
This section provides functions allowing to:
|
||||
(+) Start the WWDG.
|
||||
(+) Refresh the WWDG.
|
||||
(+) Handle WWDG interrupt request.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Starts the WWDG.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hwwdg);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_BUSY;
|
||||
|
||||
/* Enable the peripheral */
|
||||
__HAL_WWDG_ENABLE(hwwdg);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hwwdg);
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Starts the WWDG with interrupt enabled.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hwwdg);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_BUSY;
|
||||
|
||||
/* Enable the Early Wakeup Interrupt */
|
||||
__HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI);
|
||||
|
||||
/* Enable the peripheral */
|
||||
__HAL_WWDG_ENABLE(hwwdg);
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Refreshes the WWDG.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @param Counter: value of counter to put in WWDG counter
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hwwdg);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_BUSY;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_WWDG_COUNTER(Counter));
|
||||
|
||||
/* Write to WWDG CR the WWDG Counter value to refresh with */
|
||||
MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_READY;
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hwwdg);
|
||||
|
||||
/* Return function status */
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Handles WWDG interrupt request.
|
||||
* @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations
|
||||
* or data logging must be performed before the actual reset is generated.
|
||||
* The EWI interrupt is enabled using __HAL_WWDG_ENABLE_IT() macro.
|
||||
* When the downcounter reaches the value 0x40, and EWI interrupt is
|
||||
* generated and the corresponding Interrupt Service Routine (ISR) can
|
||||
* be used to trigger specific actions (such as communications or data
|
||||
* logging), before resetting the device.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
/* Check if Early Wakeup Interrupt is enable */
|
||||
if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
|
||||
{
|
||||
/* Check if WWDG Early Wakeup Interrupt occurred */
|
||||
if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
|
||||
{
|
||||
/* Early Wakeup callback */
|
||||
HAL_WWDG_WakeupCallback(hwwdg);
|
||||
|
||||
/* Change WWDG peripheral state */
|
||||
hwwdg->State = HAL_WWDG_STATE_READY;
|
||||
|
||||
/* Clear the WWDG Early Wakeup flag */
|
||||
__HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
|
||||
|
||||
/* Process Unlocked */
|
||||
__HAL_UNLOCK(hwwdg);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Early Wakeup WWDG callback.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval None
|
||||
*/
|
||||
__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg)
|
||||
{
|
||||
/* Prevent unused argument(s) compilation warning */
|
||||
UNUSED(hwwdg);
|
||||
/* NOTE: This function Should not be modified, when the callback is needed,
|
||||
the HAL_WWDG_WakeupCallback could be implemented in the user file
|
||||
*/
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions
|
||||
* @brief Peripheral State functions.
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### Peripheral State functions #####
|
||||
==============================================================================
|
||||
[..]
|
||||
This subsection permits to get in run-time the status of the peripheral
|
||||
and the data flow.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Returns the WWDG state.
|
||||
* @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified WWDG module.
|
||||
* @retval HAL state
|
||||
*/
|
||||
HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg)
|
||||
{
|
||||
return hwwdg->State;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user